MikroTik Certified Enterprise Wireless Engineer Zertifizierung (MTCEWE)

Start Events - VARIA Academy MikroTik Certified Enterprise Wireless Engineer Zertifizierung (MTCEWE)

MikroTik Certified Enterprise Wireless Engineer Zertifizierung (MTCEWE)

Die Mikrotik Training Academy bietet Interessenten aus aller Welt die Möglichkeit, Erfahrungen zu sammeln und sich über MikroTik-Produkte und Technologien zu informieren. Das MikroTik Training Programm besteht aus Kursen, welche weltweit von offiziellen MikroTik zertifizierten Trainern abgehalten werden. Die Teilnahme an diesen Kursen bietet somit auch die Möglichkeit, eine professionelle Zertifizierung in verschiedenen MikroTik-Produkttechnologien zu erhalten.

Der Certified Enterprise Wireless Engineer (MTCEWE) Kurs beinhaltet die Vermittlung von Kenntnissen über CAPsMAN und die 60GHz Technologie von MikroTik. Bestandteil des Kurses sind praktische Übungen mit einem Trainingskit, um das erworbene Wissen gleich anzuwenden. Die zu bestehende Prüfung ist ein zentraler von MikroTik vorgegebener Onlinetest.

Nach bestandener Prüfung erhalten Sie ein Zertifikat. Am Ende dieser Schulung verstehen Sie die wichtigsten Entersprise WLAN-Funktionen von RouterOS, wissen wie WiFi funktioniert und können CAPsMAN in realen WiFi Installationen implementieren.

Zielgruppe sind Netzwerktechniker, die Folgendes anwenden müssen und Support geben möchten:

  • Unternehmens-WiFi-Netzwerke basierend auf MikroTik Controlled Access Point System Manager (CAPsMAN)
  • Einfache drahtlose Layer 2-Bridges mit MikroTik 60GHz Wireless Wire-Technologie

Sprache: Dieser Kurs ist mehrsprachig und wird in Deutsch und Englisch gehalten.

Kursinhalt

Module 1: Wireless Introduction

  • Wireless routers
    • RouterBOARD hardware with integrated wire
    • MikroTik wireless cards
  • Module 1 laboratory

Module 2: RF Wireless Characteristics

  • The RF Radio Spectrum and Electromagnetic Energy
  • Decibels
  • Decibels
  • Antenna theory and examples of use
    • Isotropic
    • Directional
    • Omnidirectional
  • Antenna polarization
  • Initial class setup
  • Attenuation/absorption and reflective properties of building materials and how they affect radio signals
  • 2.4/5GHz indoor/outdoor cell sizes and transmitter powers
  • Client roaming
  • RouterOS station roaming setting
  • Co-channel and Adjacent-channel interference
  • Choosing correct access point placement
  • Physical network infrastructure
  • Understanding ‚Airtime‘
  • Module 2 laboratory

Module 3: Wireless Standards

  • 802.11a/b/g/n/ac wireless protocol
    • 802.11 standards features overvie
    • Bands, channels (frequencies) and channel widths
    • Scan list
    • Modulation schemes and MCS data rates
    • Channel bonding
    • Frame aggregation overview
    • Chains (SISO, MIMO and MU-MIMO)
    • CSMA/CA overview
    • HW protection (RTS/CTS)
    • QoS priorities / WMM®
  • Future standards (802.11ax)
  • Module 3 laboratory

Module 4: Country / Regulatory Domain Settings in CAPsMAN

  • Antenna gain and control of maximum EIRP
  • Selecting the country code and purpose of ‚installation‘ setting
  • Dynamic frequency selection (DFS radar detect)
  • Module 4 laboratory

Module 5: Non CAPsMAN Wireless Modes

  • Extending coverage with repeaters and extenders
  • Bridging with MikroTik 60GHz Wireless Wire products
  • Module 5 laboratory

Module 6: Wireless Security

  • Authentication (Open / Shared)
  • Encryption (WEP, WPA™ TKIP, WPA2™ AES)
  • Weaknesses of older encryption (WEP / WPA™ TKIP)
  • Overview of 802.11X (RADIUS and EAP)
  • Performance difference of TKIP vs. AES
  • Basic access list (ACL) management
  • Mitigating against most common known vulnerabilities of 802.11
  • Module 6 laboratory

Module 7: Wireless Troubleshooting

  • Troubleshooting wireless clients
  • Registration table analysis
  • TX/RX signal strength
  • Signal to noise ratio
  • CCQ, frames and HW frames, hardware retries
  • Data rates
  • Analysing the System log for wireless problems
  • Scan, background scan
  • Frequency usage
  • Wireless snooper
  • Wireless sniffer
  • Module 7 laboratory

Module 8: Wireless Surveys

  • Pre-install site surveys
  • Spectrum analysis overview
  • Prediction software overview
  • Post-install validation surveys
  • Module 8 laboratory

Module 9: CAPsMAN v2

  • MikroTik CAPsMAN version 2 features
  • CAP hardware/software requirements
  • L2 (broadcast/multicast) vs L3 (via UDP) CAPs communication methods
  • Using DHCP option 138
  • Configuration of a CAP
    • CAPsMAN discovery and selection by CAP
    • Authentication and locking by SSL certificates
    • Auto certificate & locking
    • Auto upgrading feature
    • Securing the CAP configuration
  • CAPsMAN configuration settings (channels, datapaths, security configurations, data rates)
  • Provisioning CAP Interfaces (single and dual band APs)
  • Datapath / local forwarding
  • Dynamic vs static CAP interfaces on CAPsMAN
  • Virtual AP (additional SSIDs)
  • Static interfaces on CAPs (slave virtual interfaces with VLANs)
  • Access list features
  • Module 9 laboratory
  • * Preisangaben: zzgl. der gesetzlichen Mehrwertsteuer
  • Voraussetzungen für Teilnahme: MTCNA
  • Weitere enthalten Leistungen:

    Tagungs-/Schulungsunterlagen, Mittagessen, Pausenerfrischungen

  • zusätzliche Information:

    Hotelbuchungen sind separat zu tätigen. Die Kursunterlagen sowie der Online-Multiple-Choice-Test sind in Englisch.

Stündlicher Zeitplan

Tag 1 - Tag 3

9 Uhr - 17 Uhr
Module 1: Wireless Introduction
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 2: RF Wireless Characteristics
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 3: Wireless Standards
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 4: Country / Regulatory Domain Settings in CAPsMAN
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 5: Non CAPsMAN Wireless Modes
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 6: Wireless Security
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 7: Wireless Troubleshooting
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 8: Wireless Surveys
(Details siehe Kursinhalt)
9 Uhr - 17 Uhr
Module 9: CAPsMAN v2
(Details siehe Kursinhalt)
Ausverkauft!
Schlagwörter:,

Datum

29 Jun 2021 - 01 Jul 2021
Abgelaufen!

Uhrzeit

9:00 - 17:00

Preis*

895,00€

Standort

VARIA Academy Chemnitz
VARIA Academy Chemnitz, Dr.-Salvador-Allende-Str. 191, 09119 Chemnitz

Redner